Ford Planar Oxygen Sensor

4-wire Planar Sensor for some Ford engines

Ford Planar Oxygen Sensor

only £ 49.94 Includes VAT! - FREE delivery!

only

£ 49.94

Includes VAT! - FREE delivery!

Product Code:	LB1604
Availability:	Out of stock, sorry Please email for details

Product details

This is a direct-fit 4-wire Planar oxygen sensor.

Compatible with some Ford Ka and Fiesta models (see compatible vehicles page).

This sensor has the correct electrical connector fitted for use with compatible vehicles (no soldering required).

Features

4-wire Planar Oxygen / Lambda Sensor
Direct Fit - no soldering required
Total length (including wire) = 394mm
See compatible vehicles section for known applications

Compatible vehicles

Important note: Ford have published a Technical Service Bulletin - TSB 67/2006 - regarding a fault on many vehicles which use this sensor.
A problem with the software on the engine ECU causes the heater circuit on the sensor to over-heat, which may cause the sensor to fail prematurely, often with one or more of the following fault codes: P0030, P0031, P0032, P0053, P0130, P0131, P0132, P0133, P0134.

The fault affects:
- Ford Ka 1.3 8v Duratec, built between 14/10/2002 and 21/12/2006
- Ford Ka 1.6 8v Duratec, built between 14/10/2002 and 21/12/2006
- Ford StreetKa 1.6 8v Duratec, built between 01/2003 and 07/2005
- Ford Fiesta 1.3 8v Duratec, built between 30/11/2001 and 07/12/2006

If your car is one of those listed above, please contact Ford to ensure that the fix for TSB 67/2006 has been applied to the car - this involves updating the ECU software with a new version that recalibrates the sensor heater.

If sensors purchased from us are used on the above cars, we can only honour the warranty if you can supply proof that the car has had the TSB 67/2006 fix applied before fitting.

This product is compatible with the following vehicles:

Model	Engine Code (Chassis)	Years
Ford
Fiesta 1.25i 16v 75bhp	ZH12	9/2000 to 12/2002
Fiesta 1.25i 16v 75bhp (Post Catalytic Convertor)	ZH12 (Sensor with grey round plug)	9/2000 to 12/2002
Fiesta 1.3i 8v 67bhp	Duratec EFi	3/2002 to 7/2003
Fiesta 1.3i 8v 70bhp	Duratec EFi	8/2003 to 1/2004
Ka 1.3i 8v 60bhp	Endura E (OE sensor has grey round plug)	10/2000 to 10/2002
Ka 1.3i 8v 70bhp	Duratec	10/2002 to 9/2008
Ka 1.6i 8v 94bhp	Zetec	5/2003 to 9/2008
StreetKa 1.6i 8v 94bhp	Zetec	2/2003 to 8/2005
Mazda
121 1.2i 16v 75bhp	ZH12	3/1996 onward

	Gendan Automotive Products
Products Help Articles