Home
Basket 
Full desktop website
| Home | Car fault-finding tools | Tesla diagnostic tools |
Diagnostic adapter cable for Tesla Model X & S
Diagnostic adapter cable (20-pin) for Tesla Model X and Model S after 2015
Diagnostic adapter cable for Tesla Model X & S
| Product Code: | LEADTE2 |
| Availability: |
In Stock!Shipped same working day. |
Product details
|
|
|
Tesla cars don't have a combustion engine and therefore aren't covered by EOBD or OBD-II diagnostics legislation or required to have a standard 16-pin diagnostic port fitted. This special adapter cable can be fitted to the Tesla CAN-bus to provide a 16-pin diagnostic port allowing access to detailed Tesla information. Suitable for Tesla Model S and Model X vehicles produced after September 2015 Recommended for use with the following smartphone apps (purchased separately): ScanMyTesla TM-SPY Our OBDLink MX+ Bluetooth diagnostic interface is compatible with this adapter and these apps. The diagnostic connector on the Model S and X can be found between the front screen and the cubby. To get access to the connector you need to pull the front of the cubby in a downwards direction (not towards you). It is held in place with two metal clips near the front of the cubby. The cubby can be easily clipped back in-place. If you have a Model S, Ensure your connector under the MCU is BLUE Connecting equipment to your Tesla is done entirely at your own risk. We cannot be held responsible for any damage caused to your vehicle through incorrect use of this product. |
