Electronic Parking Brake, Oil Service, Battery Registration, DPF and more in one tool!

The Foxwell NT650 Elite Multi-Application Service tool replaces the popular NT4021 AutoService Pro tool, and is an even more capable unit, built on Foxwell's new diagnostic platform, offering better performance and easier updates.

The NT650 Elite is designed as a vehicle servicing tool, so does not focus on system diagnostics (for a general purpose diagnostic tool see the NT680 series scan tools).

Instead, the NT650 Elite offers a vast range of servicing functions, including these and more:
(Please note - not all functions are available for all makes and models of car)

• Bleeding - ABS pump bleeds
• BRT - Battery Registration
• DPF - Regeneration / replacement
• EPB - Electronic Parking Brake wind-backs
• Fuel Pump Prime
• Injector - Diesel injector coding
• Odometer - Mileage correction
• Oil Reset - Oil service indicator reset
• SAS - Steering Angle Sensor calibration
• TPMS - Adaptation functions
• TPS - Throttle body alignment

Features include

• Read and clear fault codes
• View live sensor data
• Manually actuate components

• Resets Oil Service Light
• Resets Oil Inspection Light
• Sets Inspection Service Interval (1 & 2)
• Sets Inspection Mileage
• Provides on-screen service reset instructions for many vehicles which do not support electronic service resets

• Deactivates and re-activates brake control system
• Retracts calipers for brake pad replacement
• Advances calipers after servicing to the original position, without affecting current calibration
• Reads and clears trouble codes (fault codes)
• Turns off brake warning light
• Initializes the wear indicator if required when new pads installed
• Diagnoses EPB/SBC caliper functionality
• Resets the brake pad thickness after service on Audi A8
• Performs ECU controlled brake fluid change

• Forced regeneration of DPF
• DPF replacement function to register a new filter with the car

• Allows configuration of replacement battery - required on many new European vehicles
• Supports all brands of battery

• Allows forced regeneration of DPF on certain models

• Allows configuration/calibration of TPS on vehicles

• Compatible with 2017/2018 models on most makes
• Shows ECU information
• EOBD engine management coverage for all* UK 2001+ petrol and 2004+ cars
• EOBD / OBD-II functionality - supports ALL 5 OBD-II protocols and ALL 10 test modes
• Read EOBD / OBD-II live sensor data
• Merge live data graphs for easier fault diagnostics
• Easy-to-use with intuitive menu-driven operation
• Large TFT colour display
• Strong housing tough enough to survive the workshop
• FREE Lifetime Software Updates after registration

Package Contents

• Foxwell NT650 Elite Multi-Application Service Pro Tool
• 1.5m OBD connection cable (16-pin EOBD/OBD-II connector)
• USB update cable
• 16GB Micro-SD Card (inside tool)
• Tough plastic carry case

Registration part 1 - Create an account

• Fill in your email address and your choice of password.
• Then press the 'Send Code' button, and wait for a confirmation message.
  This will immediately email you a verification code (valid for 10 minutes) to confirm the email address is correct.
  ** Do NOT press the Send Code button more than once, as each press generates a new code, invalidating the previous one - it may take up to 10 seconds for the confirmation message to appear **
• Check your email for that code, enter it, then click the Free Registration button to complete registration.
• Once the details are accepted you will be returned to the main screen.
• Enter your email address and password, then click 'Sign In'.

Registration part 2 - Add your tool to the account

• Connect the tool to your PC using the supplied USB cable.
• Once the Main Menu has loaded, select the 'Update' option on the tool.
• The tool will enter update mode, and Windows should now see it as a 'USB Drive'.
• In the FoxAssist software on the PC, the tool's serial number should now have been detected and will be displayed in the top-right corner.
• Select the 'Activation' tab on the left side.
• The tool's serial number should be displayed at the top of the page, next to an 'Activation' button.
• Press the Activation button to activate the tool and register it to your account.
• A 'successful activation' confirmation message should be displayed, then the tool's serial number will move to the 'Activated' section.
• Now close the FoxAssist software.

Updating your tool

• To update your tool, connect it via the USB cable and select the 'Update' mode as before.
• Once Windows has detected the SD card drive, run the FoxAssist software and login again.
• The software should automatically detect the tool and show you a list of installed software.
• Any available updates will already be ticked (if none can be ticked, you are up to date!)
• Click the Upgrade button to download and install available updates.
• When all updates are installed, close FoxAssist, then press the 'Enter' button on the tool to return to the Main Menu.
• You can now disconnect the USB cable.