MS-CAN / BHCAN adaptor cable for MultiECUScan software
This is a special break-out adaptor cable specifically designed for use with the MultiECUScan software package,
to offer additional systems coverage on vehicles using the 125kbps MS-CAN / BHCAN protocols.
See the Supported Vehicles list
on the MultiECUScan website for coverage details.
Using this adaptor cable removes the need to modify your own interface cables with soldered connections that may
prevent them from being used with other vehicles.
What is included in the package?
-
'Blue' adaptor lead (MultiECUScan 'Adapter 5') - to allow 125kbps MS-CAN / BHCAN diagnostics.
This lead has a blue connector on one end for easy identification.
- Pin 6 on the diagnostic tool end of the adaptor is electrically connected to pin 3 on the car
end of the adaptor.
- Pin 14 on the diagnostic tool end of the adaptor is electrically connected to pin 11 on the car
end of the adaptor.
-
Please note this bundle does NOT include any diagnostic interface cables - this is just the 'Adapter 5'
break-out adaptor.
If you require all 5 adaptor cables, they are available here.
If you require the OBDLink and KKL interfaces too, they are available with these adaptor cables in a
hardware-only bundle here, or a full licensed bundle
here.
What do I need to use this adaptor?
- MultiECUScan software (free or licensed version)
- ELM327 v1.3 (or higher)
- A laptop or PC running Windows XP, Vista, 7, 8 or 10 with a USB port
- Microsoft .NET Framework Version 2.0 SP1 or higher (v3.5 required for Windows 8+).
Free to download from www.microsoft.com if not already installed on your computer
- 1.5GHz CPU or higher
IMPORTANT NOTE: This adaptor cable is only intended for use with the MultiECUScan software,
on supported Fiat group vehicles, as listed on the MultiECUScan.net
Supported Vehicles
List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle
or equipment.
|
|
Home
Basket
Full desktop website
