Advanced fault diagnostics for Fiat & Alfa Romeo cars
MULTIPLEXED Package! - All the coverage on one interface cable!
Our MultiECUScan package supports fault code reading (and clearing) and live sensor data from controllers such as
Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.
Finally you can look after Fiat-based cars at home or in the workshop without needing to visit the dealer!
Coverage includes 1999 to 2017** petrol and diesel models (cars must have a 16-pin diagnostic socket fitted to be compatible with this package).
** Important - 2018+ model year coverage: **
Please note - some vehicles from the 2018 model year onwards (sold since mid-2017) have a "security gateway" module (SGW). The SGW module blocks any diagnostic tool from executing commands on the
vehicle (e.g. actuations, procedures and even clearing of DTCs). It is currently not possible to access these vehicles with anything other than FIAT group's
dealership tools, without modifying the vehicle.
Vehicles known to be affected so far include MY2018 500X/Renegade, 500L MCA, Doblo, Giulia/Stelvio.
Please click here for MultiECUScan's full car coverage list.....
Video demonstration of MultiECUScan package in use:
(recorded on standard version of the package, not multiplexed package - in multiplexed package you won't see the prompts to change adaptor cables).
What features are available?
- Fault code reading and clearing
- Live sensor reading display (numerical or graph
format)
- Data Recording
- Actuator testing on supported modules
- Reset/Programming functions on supported modules
- Service Reminder Indicator reset on supported
vehicles
What is included in the package?
- MultiECUScan CanTieCar Multiplexed bluetooth / USB interface cable
- MultiECUScan software licence for full registered
version - linked to the interface cable - can be installed on multiple PCs.
- Quickstart setup guide
- Access to online support forums on MultiECUScan.net
"Multiplexed" interface? What's the difference?
With our more basic MultiECUScan bundle package you get 2 interface cables and 3 adaptor leads, so depending on the vehicle and system you are connecting to you, you may need to plug in different cables and adaptors.
The "CanTieCar" multiplexed interface cable supplied with this package is able to communicate with ALL* the control modules supported by the MultiECUScan.net software with a single cable - no more need for adaptor cables:
(* - Pre-1999 vehicles with 3-pin port will still require a 3-pin adaptor)
-
The software tells the cable which pins on the diagnostic port it needs to connect to for each module, without the need to switch cables or plug in any adaptors.
-
The cable includes a USB flash drive with the USB device drivers and MultiECUScan software installer ready to go.
-
The cable supports connection via either USB or bluetooth!
What do I need to use the package?
-
A laptop or PC running Windows 8.1 or Windows 10 with a USB port
(Windows XP, Vista and Windows 7 may still work, but are no longer supported by Microsoft and so we cannot offer support on them if we suspect the O/S to be the cause of any problems)
-
Microsoft .NET Framework Version 2.0 SP1 or newer. (Free to download from www.microsoft.com if not already installed).
For Windows 8.1 & 10, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by default.
To install, go to Control Panel -> Programs and Features -> Turn Windows features on or off, and install .NET Framework 3.5.
- 1.5GHz CPU or higher
- 2GB RAM (4GB or higher recommended)
The kit includes all necessary software and leads to connect to a Fiat or Alfa Romeo car
fitted with a 16-pin diagnostic connector.
What about updates?
The software licence entitles you to 12 months of free updates from the date of registration.
At the end of the 12 months, the version currently installed will not time out - you can continue to use it.
If you wish to continue updating the software, just purchase a new software licence for a further 12 months of updates.
Return of product
In the unlikely event that you decide to return the product, we will of course provide a refund, but we regret that we
cannot refund the software price if the MultiECUScan software has been registered. We recommend testing your vehicle
with the free software version available from MultiECUScan.net and only once satisfied it works correctly, using the
Promo code included in the package to register the full version.
|
|